Enabling TACACS+ Authentication
Page 92 7450 ESS System Mangement Guide
TACACS+ Configurations
• Enabling TACACS+ Authentication on page 92
• Configuring TACACS+ Authorization on page 93
• Configuring TACACS+ Accounting on page 94
Enabling TACACS+ Authentication
To use TACACS+ authentication on the router, configure one or more TACACS+ servers on the
network.
Use the following CLI commands to configure profiles:
CLI Syntax: config>system>security
tacplus
server server-index address ip-address secret key
timeout seconds
no shutdown
The following displays a TACACS+ authentication configuration example:
A:ALA-1>config>system>security>tacplus# info
----------------------------------------------
timeout 5
server 1 address 10.10.0.5 secret "test1"
server 2 address 10.10.0.6 secret "test2"
server 3 address 10.10.0.7 secret "test3"
server 4 address 10.10.0.8 secret "test4"
server 5 address 10.10.0.9 secret "test5"
----------------------------------------------
A:ALA-1>config>system>security>tacplus#
To Next Page
Loading...
