Security Commands
Page 246 7450 ESS System Mangement Guide
===============================================================================
Card : 1 Forwarding Plane(FP) : 1
===============================================================================
Dynamic Enforcement Policer Pool : 2000
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Statistics Information
-------------------------------------------------------------------------------
Dynamic-Policers Currently In Use : 48
Hi-WaterMark Hit Count : 72
Hi-WaterMark Hit Time : 01/03/2013 15:08:42 UTC
Dynamic-Policers Allocation Fail Count : 0
-------------------------------------------------------------------------------
===============================================================================
dist-cpu-protection
Syntax dist-cpu-protection [detail]
Context show>service>id>sap
Description This command displays Distributed CPU Protection parameters and status at the per SAP level.
Parameters detail — Include the adapted operational rate parameters in the CLI output. The adapted Oper.
parameters are only applicable if the policer is instantiated (for example, if the associated forwarding
plane is operational, or for an interface if there is a physical port configured for the interface, or if the
dynamic policers are allocated), otherwise values of 0 kbps, etc are displayed.
Output Distributed CPU Protection Policer Output — The following table describes Distributed CPU
Protection Policer Output output fields.
Table 17: Show Distributed CPU Protection Policer Output Fields
Label Description
Distributed CPU Pro-
tection Policy
The DCP policy assigned to the object.
Policer-Name
The configured name of the static policer
Card/FP
The card and FP identifier. FP identifies the instance of the FP
(FastPath) chipset. Some cards have a single FP (for example,
IOM3-XP) and some cards can contain multiple FPs (for example,
an IOM2 has two FPs and an XCM can house two FPs via its two
XMAs).
Policer-State
The state of the policer with the following potential values:
To Next Page
Loading...
