Event and Accounting Logs
7450 ESS System Mangement Guide Page 427
Configuring Throttle Rate
This command configures the number of events and interval length to be applied to all event types
that have throttling enabled by the event-control command.
Use the following CLI syntax to configure the throttle rate.
CLI Syntax: config>log#
throttle-rate events [interval seconds]
The following displays a throttle rate configuration example:
*A:gal171>config>log# info
---------------------------------------------
throttle-rate 500 interval 10
event-control "bgp" 2001 generate throttle
----------------------------------------------
*A:gal171>config>log#
To Next Page
Loading...
