SNMP
7450 ESS System Mangement Guide Page 327
A:ALA-1# show system security snmp src-access-list L1
=============================================================================
Source Access Lists
=============================================================================
List Name
HostName Host Address
-----------------------------------------------------------------------------
L1
H1 100.100.100.1
H2 100.100.100.2
-----------------------------------------------------------------------------
Total Access Lists: 1
=============================================================================
A:ALA-1#
ssh
Syntax ssh
Context show>system>security
Description This command displays all the SSH sessions as well as the SSH status and fingerprint.
Output SSH Options Output — The following table describes SSH output fields.
Sample output
A:ALA-7# show system security ssh
SSH is enabled
Table 34: Show SSH Output Fields
Label Description
SSH status
SSH is enabled — Displays that SSH server is enabled.
SSH is disabled — Displays that SSH server is disabled.
Key fingerprint
The key fingerprint is the server’s identity. Clients trying to
connect to the server verify the server's fingerprint. If the server
fingerprint is not known, the client may not continue with the
SSH session since the server might be spoofed.
Connection
The IP address of the connected router(s) (remote client).
Encryption
des — Data encryption using a private (secret) key.
3des — An encryption method that allows proprietary infor-
mation to be transmitted over untrusted networks.
Username
The name of the user.
Number of SSH sessions
The total number of SSH sessions.
To Next Page
Loading...
