Event and Accounting Logs
7450 ESS System Mangement Guide Page 521
Show Commands
accounting-policy
Syntax accounting-policy [acct-policy-id] [access | network]
Context show>log
Description This command displays accounting policy information.
Parameters policy-id — The policy ID that uniquely identifies the accounting policy, expressed as a decimal
integer.
Values 1 — 99
access — Only displays access accounting policies.
network — Only displays network accounting policies.
Output Accounting Policy Output — The following table describes accounting policy output fields.
Table 46: Show Accounting Policy Output Fields
Label Description
Policy ID
The identifying value assigned to a specific policy.
Type
Identifies accounting record type forwarded to the configured account-
ing file.
access — Indicates that the policy is an access accounting policy.
network — Indicates that the policy is a network accounting policy.
none — Indicates no accounting record types assigned.
Def
Yes — Indicates that the policy is a default access or network policy.
No — Indicates that the policy is not a default access or network pol-
icy.
Admin State
Displays the administrative state of the policy.
Up — Indicates that the policy is administratively enabled.
Down — Indicates that the policy is administratively disabled.
Oper State
Displays the operational state of the policy.
Up — Indicates that the policy is operationally up.
Down — Indicates that the policy is operationally down.
To Next Page
Loading...
