Configuring Authentication
Page 66 7450 ESS System Mangement Guide
Setting Up Security Attributes
Configuring Authentication
Refer to the following sections to configure authentication:
• Local authentication
→ Configuring Profiles on page 80
→ Configuring Users on page 81
• RADIUS authentication (only)
By default, authentication is enabled locally. Perform the following tasks to configure
security on each participating router:
→ Configuring Profiles on page 80
→ Configuring RADIUS Authentication on page 87
→ Configuring Users on page 81
• RADIUS authentication
To implement only RADIUS authentication, with authorization, perform the following
tasks on each participating router:
→ Configuring RADIUS Authentication on page 87
→ Configuring RADIUS Authorization on page 88
• TACACS+ authentication
To implement only TACACS+ authentication, perform the following tasks on each
participating router:
→ Configuring Profiles on page 80
→ Configuring Users on page 81
→ Enabling TACACS+ Authentication on page 92
To Next Page