Alcatel-Lucent 7450 - NETCONF Operations

NETCONF
7450 ESS System Mangement Guide Page 337
<get>
<filter>
<oper-data-format-cli-block>
<cli-show>system security</cli-show>
</oper-data-format-cli-block>
</filter>
</get>
</rpc>
]]>]]>
Reply:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<rpc-error>
<error-type>application</error-type>
<error-tag>operation-failed</error-tag>
<error-severity>error</error-severity>
<error-info>
<err-element>cli-show</err-element>
</error-info>
<error-message>
command failed - 'show system security'
MINOR: CLI Command not allowed for this user.
</error-message>
</rpc-error>
</rpc-reply>
]]>]]>
NETCONF Operations
The following base protocol operations are supported:
•<get>
• <get-config>
• <edit-config>
• <copy-config>
• <delete-config>
• <validate>
• <close-session>
• <kill-session>
The <lock> and <unlock> base protocol operations are not supported.
The <error-option> is not supported. SR OS implements the stop-on-error behavior by default.
The continue-on-error and rollback-on-error are not supported.