Configuring MAC CPM Filters
Page 76 7450 ESS System Mangement Guide
Configuring MAC CPM Filters
CPM filters and queues control all traffic going in to the CPM, including all routing protocols.
They apply to packets from all network and access ports, but not to packets from a management
Ethernet port. CPM packet filtering and queuing is performed by network processor hardware
using no resources on the main CPUs. CPM filters and queues are not configurable on one-slot
chassis.
The following displays a MAC CPM filter configuration example:
*A:ALA-49>config>sys>sec>cpm>mac-filter# info
----------------------------------------------
entry 10 create
description "MAC-CPM-Filter 10.10.10.100 #007"
match
exit
log 101
action drop
exit
entry 20 create
description "MAC-CPM-Filter 10.10.10.100 #008"
match
exit
log 101
action drop
exit
no shutdown
----------------------------------------------
*A:ALA-49>config>sys>sec>cpm>mac-filter#
To Next Page
Loading...
