Alcatel-Lucent 7450 - Returning to the Default Event Control Configuration

Event and Accounting Logs
7450 ESS System Mangement Guide Page 451
The following displays an example of an event control modifications:
Example: config# log
config>log# event-control ospf 2014 suppress
The following displays the log filter configuration:
A:ALA-12>config>log# info
----------------------------------------------
...
event-control "ospf" 2014 suppress
...
----------------------------------------------
A:ALA-12>config>log#
Returning to the Default Event Control Configuration
The no form of the event-control command returns modified values back to the default values.
Use the following CLI syntax to modify event control parameters:
CLI Syntax: config>log
no event-control application [event-name |event-nunmber]
The following displays an example of the command usage to return to the default values:
Example: config# log
config>log# no event-control "ospf" 2001
config>log# no event-control "ospf" 2002
config>log# no event-control "ospf" 2014
A:ALA-12>config>log# info detail
----------------------------------------------
#------------------------------------------
echo "Log Configuration"
#------------------------------------------
event-control "ospf" 2001 generate minor
event-control "ospf" 2002 generate warning
event-control "ospf" 2003 generate warning
event-control "ospf" 2004 generate critical
event-control "ospf" 2005 generate warning
event-control "ospf" 2006 generate warning
event-control "ospf" 2007 generate warning
event-control "ospf" 2008 generate warning
event-control "ospf" 2009 generate warning