Alcatel-Lucent 7450 - Table 15: Show CPM Ipv6 Filter Output Fields

Security Commands
Page 238 7450 ESS System Mangement Guide
ipv6-filter
Syntax ipv6-filter [entry entry-id]
Context show>system>security>cpm-filter
Description This command displays CPM IPv6 filters.
Parameters entry entry-id — Identifies a CPM filter entry as configured on this system.
Values 1 — 2048
cpm-queue
Syntax cpm-queue queue-id
Context show>system>security
Description Displays CPM queues.
Parameters queue-id — Specifies an integer value that identifies a CPM queue.
Values 0, 33 — 2000
CPM queue Output — The following table describes CPM queue output fields..
Sample Output
A:ALA-35# show system security cpm-queue 1001
===============================================================================
CPM Queue Entry
===============================================================================
Queue Id : 1001
-------------------------------------------------------------------------------
Queue Parameters :
-------------------------------------------------------------------------------
PIR : 10000000 CIR : 1000000
CBS : 4096 MBS : 8192
===============================================================================
A:ALA-35#
Table 15: Show CPM IPv6 Filter Output Fields
Label Description
PIR
Displays the administrative Peak Information Rate (PIR) for the queue.
CIR
Displays the amount of bandwidth committed to the queue.
CBS
Displays the amount of buffer drawn from the reserved buffer portion
of the queue’s buffer pool.
MBS
Displays the maximum queue depth to which a queue can grow.