Alcatel-Lucent 7450 - Configuring Login Controls

Enabling SSH
Page 96 7450 ESS System Mangement Guide
Configuring Login Controls
Configure login control parameters for console, Telnet, and FTP sessions.
To configure login controls, enter the following CLI syntax.
CLI Syntax: config>system
login-control
exponential-backoff
ftp
inbound-max-sessions value
telnet
inbound-max-sessions value
outbound-max-sessions value
idle-timeout {minutes |disable}
pre-login-message login-text-string [name]
login-banner
motd {url url-prefix: source-url|text motd-text-string}
The following displays a login control configuration example:
A:ALA-1>config>system# info
----------------------------------------------
...
login-control
ftp
inbound-max-sessions 5
exit
telnet
inbound-max-sessions 7
outbound-max-sessions 2
exit
idle-timeout 1440
pre-login-message "Property of Service Routing Inc. Unauthorized access prohib-
ited."
motd text "Notice to all users: Software upgrade scheduled 3/2 1:00 AM"
exit
no exponential-backoff
...
----------------------------------------------
A:ALA-1>config>system#