EasyManua.ls Logo

Alcatel-Lucent 7450 - Table 19: Show Management Access Filter Output Fields

Alcatel-Lucent 7450
554 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Security
7450 ESS System Mangement Guide Page 257
Active : No Tolerance : 500
Begin Time : 2007/02/15 18:28:13 Begin Time (UTC) : 2007/02/15 17:28:13
End Time : 2007/02/15 18:28:37 End Time (UTC) : 2007/02/15 17:28:37
===============================================================================
*A:ALA-A#
management-access-filter
Syntax management-access-filter
Context show>system>security
Description This commend displays management access filter information for IP and MAC filters.
ip-filter
Syntax ip-filter [entry entry-id]
Context show>system>security>mgmt-access-filter
Description This command displays management-access IP filters.
Parameters entry-id — Displays information for the specified entry.
Values 1 — 9999
Output Management Access Filter Output — The following table describes management access filter
output fields.
Table 19: Show Management Access Filter Output Fields
Label Description
Def. action
Permit — Specifies that packets not matching the configured
selection criteria in any of the filter entries are permitted.
Deny — Specifies that packets not matching the configured selection
criteria in any of the filter entries are denied and that a ICMP host
unreachable message will be issued.
Deny-host-unreachble — Specifies that packets not matching
the configured selection criteria in the filter entries are denied.
Entry
The entry ID in a policy or filter table.
Description
A text string describing the filter.
Src IP
The source IP address used for management access filter match crite-
ria.

Table of Contents

Other manuals for Alcatel-Lucent 7450

Related product manuals