Configuring Profiles
Page 80 7450 ESS System Mangement Guide
Configuring Profiles
Profiles are used to deny or permit access to a hierarchical branch or specific commands. Profiles
are referenced in a user configuration. A maximum of sixteen user profiles can be defined. A user
can participate in up to sixteen profiles. Depending on the the authorization requirements,
passwords are configured locally or on the RADIUS server.
The following example displays a user profile output:
A:ALA-1>config>system>security# info
----------------------------------------------
...
profile "ghost"
default-action permit-all
entry 1
match "configure"
action permit
exit
entry 2
match "show"
exit
entry 3
match "exit"
exit
exit
...
----------------------------------------------
A:ALA-1>config>system>security#
To Next Page
Loading...
