Alcatel-Lucent 7450 - Configuring TACACS+ Accounting

Configuring TACACS+ Accounting
Page 94 7450 ESS System Mangement Guide
Configuring TACACS+ Accounting
On the local router, use the following CLI commands to configure TACACS+ accounting:
CLI Syntax: config>system>security
tacplus
accounting
The following displays a TACACS+ accounting configuration example:
A:ALA-1>config>system>security>tacplus# info
----------------------------------------------
accounting
authorization
timeout 5
server 1 address 10.10.0.5 secret "test1"
server 2 address 10.10.0.6 secret "test2"
server 3 address 10.10.0.7 secret "test3"
server 4 address 10.10.0.8 secret "test4"
server 5 address 10.10.0.9 secret "test5"
----------------------------------------------
A:ALA-1>config>system>security>tacplus#