Security
7450 ESS System Mangement Guide Page 231
Show Commands
Security Commands
access-group
Syntax access-group [group-name]
Context show>system>security
Description This command displays SNMP access group information.
Parameters group-name — This command displays information for the specified access group.
Output Security Access Group Output — The following table describes security access group output
fields..
Sample Output
A:ALA-4# show system security access-group
===============================================================================
Access Groups
===============================================================================
group name security security read write notify
model level view view view
-------------------------------------------------------------------------------
snmp-ro snmpv1 none no-security no-security
snmp-ro snmpv2c none no-security no-security
snmp-rw snmpv1 none no-security no-security no-security
snmp-rw snmpv2c none no-security no-security no-security
snmp-rwa snmpv1 none iso iso iso
snmp-rwa snmpv2c none iso iso iso
Table 11: Show System Security Access Group Output Fields
Label Description
Group name
The access group name.
Security model
The security model required to access the views configured in this node.
Security level
Specifies the required authentication and privacy levels to access the
views configured in this node.
Read view
Specifies the variable of the view to read the MIB objects.
Write view
Specifies the variable of the view to configure the contents of the agent.
Notify view
Specifies the variable of the view to send a trap about MIB objects.
To Next Page
Loading...
