Page 318 7450 ESS System Mangement Guide
===============================================================================
Access Groups
===============================================================================
group name security security read write notify
model level view view view
-------------------------------------------------------------------------------
snmp-ro snmpv1 none no-security no-security
-------------------------------------------------------------------------------
No. of Access Groups:
...
===============================================================================
A:ALA-1#
authentication
Syntax authentication [statistics]
Context show>system>security
Description This command displays authentication information.
Output Authentication Output — The following table describes the authentication output fields.
Label Description
sequence
The authentication order in which password authentication, authoriza-
tion, and accounting is attempted among RADIUS, TACACS+, and
local passwords.
server address
The address of the RADIUS, TACACS+, or local server.
status
The status of the server.
type
The type of server.
timeout (secs)
Number of seconds the server will wait before timing out.
single connection
Specifies whether a single connection is established with the server.
The connection is kept open and is used by all the TELNET/SSH/FTP
sessions for AAA operations.
retry count
The number of attempts to retry contacting the server.
radius admin sta-
tus
The administrative status of the RADIUS protocol operation.
tacplus admin sta-
tus
The administrative status of the TACACS+ protocol operation.
To Next Page
Loading...
