SNMP
7450 ESS System Mangement Guide Page 319
Sample Output
A:ALA-49>show>system>security# authentication
===============================================================================
Authentication sequence : radius tacplus local
===============================================================================
server address status type timeout(secs) single connection retry count
-------------------------------------------------------------------------------
10.10.10.103 up radius 5 n/a 5
10.10.0.1 up radius 5 n/a 5
10.10.0.2 up radius 5 n/a 5
10.10.0.3 up radius 5 n/a 5
-------------------------------------------------------------------------------
radius admin status : down
tacplus admin status : up
health check : enabled
-------------------------------------------------------------------------------
No. of Servers: 4
===============================================================================
A:ALA-49>show>system>security#
password-options
Syntax password-options
Context show>system>security
Description This command displays password options.
Output Password-Options Output — The following table describes password-options output fields.
health check
Specifies whether the RADIUS and TACACS+ servers will be periodi-
cally monitored. Each server will be contacted every 30 seconds. If in
this process a server is found to be unreachable, or a previously
unreachable server starts responding, based on the type of the server, a
trap will be sent.
No. of Servers
The total number of servers configured.
Label Description (Continued)
Label Description
Password aging in
days
Number of days a user password is valid before the user must change
his password.
Number of invalid
attempts permit-
ted per login
Displays the maximum number of unsuccessful login attempts allowed
for a user.
Time in minutes
per login attempt
Displays the time in minutes that user is to be locked out.
To Next Page
Loading...
