RADIUS Client Commands
Page 180 7450 ESS System Mangement Guide
retry
Syntax retry count
no retry
Context config>system>security>radius
config>system>security>dot1x>radius-plcy
Description This command configures the number of times the router attempts to contact the RADIUS server for
authentication if there are problems communicating with the server.
The no form of the command reverts to the default value.
Default 3
Parameters count — The retry count.
Values 1 — 10
priv-lvl-map
Syntax [no] priv-lvl-map
Context config>system>security>tacplus
Description This command is used to specify a series of mappings between TACACS+ priv-lvl and locally con-
figured profiles for authorization. These mappings are used when the use-priv-lvl option is specified
for tacplus authorization.
priv-lvl
Syntax priv-lvl priv-lvl user-profile-name
no priv-lvl priv-lvl
Context config>system>security>tacplus>priv-lvl-map
Description This command maps a specific TACACS+ priv-lvl to a locally configured profile for authorization.
This mapping is used when the use-priv-lvl option is specified for TACPLUS authorization.
Parameters priv-lvl — Specifies the privilege level used when sending a TACACS+ ENABLE request.
Values 0 — 15
user-profile-name — Specifies the user profile for this mapping.
server
Syntax server index address ip-address secret key [hash | hash2]
no server index
To Next Page
Loading...
