Security
7450 ESS System Mangement Guide Page 115
Configuration Commands
General Security Commands
description
Syntax description description-string
no description
Context config>system>security>mgmt-access-filter>ip-filter>entry
config>sys>sec>cpm>ip-filter>entry
config>sys>sec>cpm>mac-filter>entry
config>sys>security>keychain>direction>bi>entry
config>system>security>keychain>direction>uni>receive>entry
config>system>security>keychain>direction>uni>send>entry
config>system>security>pki>ca-profile
config>sys>security>cpu-protection>policy
config>system>security>mgmt-access-filter>mac-filter>entry
config>system>security>cpm-filter>mac-filter>entry
Description This command creates a text description stored in the configuration file for a configuration context.
This command associates a text string with a configuration context to help identify the context in the
configuration file.
The no form of the command removes the string.
Default No description associated with the configuration context.
Parameters string — The description character string. Allowed values are any string up to 80 characters long
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
shutdown
Syntax [no] shutdown
Context config>system>security>mgmt-access-filter>ip-filter
config>sys>sec>cpm>ip-filter
config>system>security>keychain>direction>bi>entry
config>system>security>keychain>direction>uni>receive>entry
To Next Page
Loading...
