Alcatel-Lucent 7450 - Page 324

Page 324 7450 ESS System Mangement Guide
Action : permit
-------------------------------------------------------------------------------
Entry : 30
Description :
Match Command: help
Action : permit
-------------------------------------------------------------------------------
...
-------------------------------------------------------------------------------
Entry : 80
Description :
Match Command: enable-admin
Action : permit
===============================================================================
User Profile : administrative
Def. Action : permit-all
-------------------------------------------------------------------------------
Entry : 10
Description :
Match Command: configure system security
Action : permit
-------------------------------------------------------------------------------
Entry : 20
Description :
Match Command: show system security
Action : permit
===============================================================================
-------------------------------------------------------------------------------
No. of profiles: 3
===============================================================================
A:ALA-48>config>system>snmp#
snmp
Syntax snmp
Context show>system>security
Description This command enables the context to show SNMP information.
community
Syntax community [community-string]
Context show>system>security>snmp
Description This command lists SNMP communities and characterisics. Including the community-name
parameter modifies the output to include all details for the specified community, including the source
IP address list and validation failure counters.
Output Community Ouput — The following table describes the community output fields.