SNMP
7450 ESS System Mangement Guide Page 323
A:ALA-48>config>system>snmp# show system security profile
===============================================================================
User Profile
===============================================================================
User Profile : test
Def. Action : none
-------------------------------------------------------------------------------
Entry : 1
Description :
Match Command:
Action : unknown
===============================================================================
User Profile : default
Def. Action : none
-------------------------------------------------------------------------------
Entry : 10
Description :
Match Command: exec
Action : permit
-------------------------------------------------------------------------------
Entry : 20
Description :
Match Command: exit
Match Command
administrative — Enables the user to execute all commands.
configure system security — Enables the user to execute
the config system security command.
enable-admin — Enables the user to enter a special administra-
tive mode by entering the enable-admin command.
exec — Enables the user to execute (exec) the contents of a text file
as if they were CLI commands entered at the console.
exit — Enables the user to execute the exit command.
help — Enables the user to execute the help command.
logout — Enables the user to execute the logout command.
password — Enables the user to execute the password command.
show config — Enables the user to execute the show config com-
mand.
show — Enables the user to execute the show command.
show system security — Enables the user to execute the
show system security command.
Action
permit — Enables the user access to all commands.
deny-all — Denies the user access to all commands.
Label Description
To Next Page
Loading...
