Alcatel-Lucent 7450 - Page 263

Security
7450 ESS System Mangement Guide Page 263
-------------------------------------------------------------------------------
telnet 10.20.1.7 Up
radius loopback1 Up
===============================================================================
A:SR-7#
ssh
Syntax ssh
Context show>system>security
Description This command displays all the SSH sessions as well as the SSH status and fingerprint. The type of
SSH application (CLI, SCP, SFTP or NETCONF) is indicated for each SSH connection.
Output SSH Options Output — The following table describes SSH output fields .
Label Description
SSH status
SSH is enabled — Displays that SSH server is enabled.
SSH is disabled — Displays that SSH server is disabled.
SSH Preserve Key
Enabled — Displays that preserve-key is enabled.
Disabled — Displays that preserve-key is disabled.
SSH protocol ver-
sion 1
Enabled — Displays that SSH1 is enabled.
Disabled — Displays that SSH1 is disabled.
SSH protocol ver-
sion 2
Enabled — Displays that SSH2 is enabled.
Disabled — Displays that SSH2 is disabled.
Key fingerprint
The key fingerprint is the server’s identity. Clients trying to connect to
the server verify the server's fingerprint. If the server fingerprint is not
known, the client may not continue with the SSH session since the
server might be spoofed.
Connection
The IP address of the connected router(s) (remote client).
Encryption
des — Data encryption using a private (secret) key.
3des — An encryption method that allows proprietary information to
be transmitted over untrusted networks.
Username
The name of the user.
Version
The SSH version number.
Server Name
The type of SSH application (CLI, SCP, SFTP or NETCONF)
Number of SSH ses-
sions
The total number of SSH sessions.