Alcatel-Lucent 7450 - Page 137

Security
7450 ESS System Mangement Guide Page 137
Values 0 — 255
end — Specifies the end number.
Values 0 — 255
lt|gt|eq — keywords
dot1p
Syntax dot1p dot1p-value [dot1p-mask]
Context config>system>security>mgmt-access-filter>mac-filter>entry>match
Description This command configures Dot1p match conditions.
Parameters dot1p-value — The IEEE 802.1p value in decimal.
Values 0 — 7
mask — This 3-bit mask can be configured using the following formats:
Values 0 — 7
dsap
Syntax dsap dsap-value [dsap-mask]
Context config>system>security>mgmt-access-filter>mac-filter>entry>match
Description
This command configures dsap match conditions.
Parameters dsap-value — The 8-bit dsap match criteria value in hexadecimal.
Values 0x00 — 0xFF (hex)
mask — This is optional and may be used when specifying a range of dsap values to use as the match
criteria.
Format Style Format Syntax Example
Decimal
D4
Hexadecimal
0xH 0x4
Binary
0bBBB 0b100