Security
7450 ESS System Mangement Guide Page 149
required
Syntax required [lowercase count] [uppercase count] [numeric count] [special-character count]
no required
Context config>system>security>password>complexity-rules
Description Force the minimum number of different character classes required.
The no form of the command resets to default.
Default no required
Parameters count — The minimum count of characters classes.
Values 0-10
dynsvc-password
Syntax dynsvc-password password [hash|hash2]
no dynsvc-password
Context config>system>security>password
Description Configure the password which enables the user to configure dynamic services.
Default no dynsvc-password
Parameters password — Configures the password which enables a user to become a system administrator. The
maximum length can be up to 20 characters if unhashed, 32 characters if hashed, 54 characters if
the hash2 keyword is specified.
hash — Specifies the key is entered in an encrypted form. If the hash parameter is not used, the key
is assumed to be in a non-encrypted, clear text form. For security, all keys are stored in encrypted
hash2 — Specifies the key is entered in a more complex encrypted form. If the hash2 parameter is
not used, the less encrypted hash form is assumed.
enable-admin-control
Syntax enable-admin-control
Context config>system>security>password
Description Enable the user to become a system administrator.
tacplus-map-to-priv-lvl
Syntax tacplus-map-to-priv-lvl [admin-priv-lvl]
To Next Page
Loading...
