Security
7450 ESS System Mangement Guide Page 157
responder-url
Syntax responder-url url-string
no responder-url
Context config>system>security>pki>ca-profile>ocsp
Description This command specifies HTTP URL of the OCSP responder for the CA, this URL will only be used if
there is no OCSP responder defined in the AIA extension of the certificate to be verified.
Default no responder-url
Parameters url-string — Specifies the HTTP URL of the OCSP responder
service
Syntax service service-id
no service
Context config>system>security>pki>ca-profile>ocsp
Description This command specifies the service or routing instance that used to contact OCSP responder. This
applies to OCSP responders that either configured in CLI or defined in AIA extension of the certifi-
cate to be verified.
The responder-url will also be resolved by using the DNS server configured in the configured routing
instance.
In case of VPRN service, system will check if the specified service-id or service-name is an existing
VPRN service at the time of CLI configuration. Otherwise the configuration will fail.
Parameters service-id — Specifies an existing service ID to be used in the match criteria.
Values service-id: 1 — 2147483647
base-router: 0
To Next Page
Loading...
