Alcatel-Lucent 7450 - Page 166

Profile Management Commands
Page 166 7450 ESS System Mangement Guide
Profile Management Commands
action
Syntax action {deny | permit}
Context config>system>security>profile user-profile-name>entry entry-id
Description This command configures the action associated with the profile entry.
Parameters deny — Specifies that commands matching the entry command match criteria are to be denied.
permit — Specifies that commands matching the entry command match criteria will be permitted.
match
Syntax match command-string
no match
Context config>system>security>profile user-profile-name>entry entry-id
Description This command configures a command or subtree commands in subordinate command levels are spec-
ified.
Because the OS exits when the first match is found, subordinate levels cannot be modified with sub-
sequent action commands. More specific action commands should be entered with a lower entry
number or in a profile that is evaluated prior to this profile.
All commands below the hierarchy level of the matched command are denied.
The no form of this command removes a match condition
Default none
Parameters command-string — The CLI command or CLI tree level that is the scope of the profile entry.
copy
Syntax copy {user source-user | profile source-profile} to destination [overwrite]
Context config>system>security
Description This command copies a profile or user from a source profile to a destination profile.
Parameters source-profile — The profile to copy. The profile must exist.
dest-profile — The copied profile is copied to the destination profile.