User Management Commands
Page 172 7450 ESS System Mangement Guide
Context config>system>security>user>console
Description This command allows a user the privilege to change their password for both FTP and console login.
To disable a user’s privilege to change their password, use the cannot-change-password form of the
command.
Note that the cannot-change-password flag is not replicated when a user copy is performed. A new-
password-at-login flag is created instead.
Default no cannot-change-password
console
Syntax console
Context config>system>security>user
config>system>security>user-template
Description This command creates the context to configure user profile membership for the console (either Telnet
or
CPM serial port user).
copy
Syntax copy {user source-user | profile source-profile} to destination [overwrite]
Context config>system>security
Description This command copies a specific user’s configuration parameters to another (destination) user.
The password is set to a carriage return and a new password at login must be selected.
Parameters source-user — The user to copy. The user must already exist.
dest-user — The copied profile is copied to a destination user.
overwrite — Specifies that the destination user configuration will be overwritten with the copied
source user configuration. A configuration will not be overwritten if the overwrite command is
not specified.
home-directory
Syntax home-directory url-prefix [directory] [directory/directory…]
no home-directory
Context config>system>security>user
config>system>security>user-template
Description This command configures the local home directory for the user for both console (file commands and
'>' redirection) and FTP access.
To Next Page
Loading...
