User Management Commands
Page 176 7450 ESS System Mangement Guide
Context config>system>security>user
Description This command allows the user to associate an RSA public key with the user-name. The public key
must be enclosed in quotation marks. This command may be used several times since a user may
have multiple public keys. The key is a 1024-bit key.
Default none
Parameters public-key-value — Specifies the public key up to 255 characters in length. The key is a 1024-bit key.
key-id — Specifies the key identifier name.
Values 1 — 32
snmp
Syntax snmp
Context config>system>security>user
Description This command creates the context to configure SNMP group membership for a specific user and
defines encryption and authentication parameters.
All SNMPv3 users must be configured with the commands available in this CLI node.
The OS always uses the configured SNMPv3 user name as the security user name.
user-template
Syntax user-template {tacplus_default | radius_default}
Context config>system>security
Description This command configures default security user template parameters.
Parameters tacplus_default — Specifies that the default TACACS+ user template is actively applied to the
TACACS+ user.
radius_default — specifies that the default RADIUS user template is actively applied to the
RADIUS user if no VSAs are returned with the auth-accept from the RADIUS server.
user
Syntax [no] user user-name
Context config>system>security
Description This command creates a local user and a context to edit the user configuration.
If a new user-name is entered, the user is created. When an existing user-name is specified, the user
parameters can be edited.
To Next Page
Loading...
