Security
7450 ESS System Mangement Guide Page 213
CPU Protection Commands
cpu-protection
Syntax cpu-protection
Context config>sys>security
Description This command enters the context to configure CPU protection parameters.
included-protocols
Syntax included-protocols
Context config>sys>security>cpu-protection> ip>included-protocols
Description This context allows configuration of which protocols are included for ip-src-monitoring. This is sys-
tem-wide configuration that applies to cpu protection globally.
dhcp
Syntax [no] dhcp
Context config>sys>security>cpu-protection> ip>included-protocols
Description Include extracted IPv4 DHCP packets for ip-src-monitoring. IPv4 DHCP packets will be subject to
the per-source-rate of cpu protection policies.
Default dhcp (note this is different than the other protocols)
gtp
Syntax [no] gtp
Context config>sys>security>cpu-protection> ip>included-protocols
Description Include extracted IPV4 GTP packets for ip-src-monitoring. IPv4 GTP packets will be subject to the
per-source-rate of cpu protection policies.
Default no gtp
To Next Page
Loading...
