Alcatel-Lucent 7450 - Page 321

SNMP
7450 ESS System Mangement Guide Page 321
Output Per-Peer_Queuing Output — The following table describes the per-peer-queuing output fields.
Sample Output
A:ALA-48>show>system>security# per-peer-queuing
=================================================
CPM Hardware Queuing
=================================================
Per Peer Queuing : Enabled
Total Num of Queues : 8192
Num of Queues In Use : 0
=================================================
A:ALA-48>show>system>security#
Label Description
Per Peer Queuing
Displays whether per-peer-queuing is enabled or disabled. When
enabled, a peering session is established and the router will automati-
cally allocate a separate CPM hardware queue for that peer. When dis-
abled, no hardware queuing per peer occurs.
Total Num of
Queues
Displays the total number of CPM hardware queues.
Num of Queues In
Use
Displays the number of CPM hardware queues that are in use.