Alcatel-Lucent 7450 - Page 346

NETCONF in SR OS
Page 346 7450 ESS System Mangement Guide
Example 1 — Two rollback items with responses:
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="102" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<cli-action>
<admin>rollback compare active-cfg to 1</admin>
<admin>rollback compare</admin>
</cli-action>
</rpc>
]]>]]>
Reply:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply message-id="102" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<data xmlns="urn:alcatel-lucent.com:sros:ns:yang:cli-content-layer-r13">
<cli-action>
<item>
<admin>rollback compare active-cfg to 1</admin>
<response>
0.150 s
0.450 s
----------------------------------------------
configure
router
- mpls
- shutdown
- interface "system"
- no shutdown
- exit
- lsp "test"
- shutdown
- exit
- exit
- rsvp
- shutdown
- interface "system"
- no shutdown
- exit
- exit
exit
exit
----------------------------------------------
Finished in 0.720 s
</response>
</item>
<item>
<admin>rollback compare</admin>
<response>
0.160 s
0.070 s
----------------------------------------------
configure
router
- mpls
- shutdown
- interface "system"
- no shutdown