Configuring an SNMP Trap Group
Page 430 7450 ESS System Mangement Guide
The following displays a SNMP trap group, log, and interface configuration examples:
A:SetupCLI>config>log# snmp-trap-group 44
A:SetupCLI>config>log>snmp-trap-group# info
----------------------------------------------
trap-target "xyz-test" address xx.xx.x.x snmpv2c notify-community "xyztesting"
trap-target "test2" address xx.xx.xx.x snmpv2c notify-community "xyztesting"
----------------------------------------------
*A:SetupCLI>config>log>log-id# info
----------------------------------------------
from main
to snmp
----------------------------------------------
*A:SetupCLI>config>router# interface xyz-test
*A:SetupCLI>config>router>if# info
----------------------------------------------
address xx.xx.xx.x/24
port 1/1/1
----------------------------------------------
*A:SetupCLI>config>router>if#
To Next Page
Loading...
