Event and Accounting Logs
7450 ESS System Mangement Guide Page 479
Event Handling System (EHS) Commands
event-handling
Syntax event-handling
Context config>log
Description This command enables the context to configure event handling within the Event Handler System
(EHS).
handler
Syntax [no] handler event-handler-name
Context config>log>event-handling
Description This command configures an EHS handler.
The no form of the command removes the specified EHS handler.
Parameters event-handler-name — Specifies the name of the EHS handler. Can be up to 32 characters maximum.
action-list
Syntax action-list
Context config>log>event-handling>handler
Description This command enables the context to configure the EHS handler action list.
entry
Syntax [no] entry entry-id
Context config>log>event-handling>handler>action-list
Description This command configures an EHS handler action-list entry. A handler can have multiple actions
where each action, for example, could request the execution of a different script. When the handler is
triggered it will walk through the list of configured actions.
The no form of the command removes the specified EHS handler action-list entry.
Parameters entry-id — Specifies the identifier of the EHS handler entry.
Values 1 — 1500
To Next Page
Loading...
