Accounting Policy Commands
Page 510 7450 ESS System Mangement Guide
override-counter
Syntax [no] override-counter override-counter-id
Context config>log>acct-policy>cr
Description This command enables the context to configure override counter (HSMDA) parameters.
The no form of the command removes the ID from the configuration.
Parameters override-counter-id — Specifies the override counter ID.
Values 1 — 8
queue
Syntax [no] queue queue-id
Context config>log>acct-policy>cr
Description This command specifies the queue-id for which counters will be collected in this custom record. The
counters that will be collected are defined in egress and ingress counters.
The no form of the command reverts to the default value.
Parameters queue-id — Specifies the queue-id for which counters will be collected in this custom record.
e-counters
Syntax [no] e-counters
Context config>log>acct-policy>cr>override-cntr
config>log>acct-policy>cr>queue
config>log>acct-policy>cr>ref-override-cntr
config>log>acct-policy>cr>ref-queue
Description This command configures egress counter parameters for this custom record.
The no form of the command reverts to the default value.
To Next Page
Loading...
