Event and Accounting Logs
7450 ESS System Mangement Guide Page 525
...
OSPF
PIM
...
PORT
...
SYSTEM
...
USER
...
VRTR
...
===================================
A:ALA-1#
event-control
Syntax event-control [application [event-name | event-number]]
Context show>log
Description This command displays event control settings for events including whether the event is suppressed or
generated and the severity level for the event.
If no options are specified all events, alarms and traps are listed.
Parameters application — Only displays event control for the specified application.
Default All applications.
Values chassis, debug, dhcp, efm_oam, filter, gsmp, igmp_snooping, ip, isis, lag, ldp,
logger, mc_redundancy, mirror, mpls, ntp, oam, ospf, port, ppp, rip, route_policy,
rsvp, security, snmp, stp, svcmgr, system, user, vrrp, vrtr
event-name — Only displays event control for the named application event.
Default All events for the application.
event-number — Only displays event control for the specified application event number.
Default All events for the application.
Output Show Event Control Output — The following table describes the output fields for the event
control.
Label Description
Application
The application name.
ID#
The event ID number within the application.
L
ID# — An “L” in front of an ID represents event types that do not
generate an associated SNMP notification. Most events do generate a
notification, only the exceptions are marked with a preceding “L”.
Event Name
The event name.
To Next Page