Show Commands
Page 528 7450 ESS System Mangement Guide
2005 ospfVirtIfConfigError WA gen 0 0
2006 ospfIfAuthFailure WA gen 0 0
2007 ospfVirtIfAuthFailure WA gen 0 0
2008 ospfIfRxBadPacket WA gen 0 0
2009 ospfVirtIfRxBadPacket WA gen 0 0
2010 ospfTxRetransmit WA sup 0 0
2011 ospfVirtIfTxRetransmit WA sup 0 0
2012 ospfOriginateLsa WA sup 0 404
2013 ospfMaxAgeLsa WA gen 3 0
2014 ospfLsdbOverflow WA gen 0 0
2015 ospfLsdbApproachingOverflow WA gen 0 0
2016 ospfIfStateChange WA gen 2 0
2017 ospfNssaTranslatorStatusChange WA gen 0 0
2018 vRtrOspfSpfRunsStopped WA gen 0 0
2019 vRtrOspfSpfRunsRestarted WA gen 0 0
2020 vRtrOspfOverloadEntered WA gen 1 0
2021 vRtrOspfOverloadExited WA gen 0 0
2022 ospfRestartStatusChange WA gen 0 0
2023 ospfNbrRestartHelperStatusChange WA gen 0 0
2024 ospfVirtNbrRestartHelperStsChg WA gen 0 0
=======================================================================
A:ALA-1#
A:ALA-1# show log event-control ospf ospfVirtIfStateChange
=======================================================================
Log Events
=======================================================================
Application
ID# Event Name P g/s Logged Dropped
-----------------------------------------------------------------------
2001 ospfVirtIfStateChange WA gen 0 0
=======================================================================
A:ALA-1#
event-handling
Syntax event-handling
Context show>log
Description This command enables the context to display Event Handling System (EHS) information.
handler
Syntax handler [handler-name]
handler detail
Context show>log>event-handling
Description This command enters the context to display EHS handler information.
Parameters handler-name — Specifies the name of a specific handler. 32 characters maximum.
detail — Keyword to list details of all handlers.
To Next Page
Loading...
