Basic CLI Command Reference
100 Basic System Configuration Guide
5/2/1 I 4254070784 692394 0 43.64
I 4253952000 692375 0 43.64
-------------------------------------------------------------------------------
At time t = 12 sec (Mode: Rate)
-------------------------------------------------------------------------------
5/1/1 I 9746288640 1586K 0 99.99
I 9746216960 1586K 0 99.99
5/2/1 I 9746280448 1586K 0 99.99
I 9746167808 1586K 0 99.99
===============================================================================
A:ALA-12>monitor#
atm
Syntax atm [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>port
Description This command enables ATM port traffic monitoring and is supported on the 7750 SR.
Parameters interval seconds — Configures the interval for each display in seconds.
Default 10 seconds
Values 3 to 60
repeat repeat — Configures how many times the command is repeated.
Default 10
Values 1 to 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
processing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
instead of the delta.
port
Syntax port port-id atm [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm aal-5 [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm ilmi [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm interface-connection [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm pvc [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm pvp [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm pvt [interval
seconds] [repeat repeat] [absolute | rate]
Context monitor
Description This command monitors ATM port traffic statistics and applies to the 7750 SR.
To Next Page
Loading...
