CLI Usage
Basic System Configuration Guide 103
interval — seconds — Configures the interval for each display in seconds.
Default 11 seconds
Values 11 to 60
repeat repeat — Configures how many times the command is repeated.
Default 10
Values 1 to 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed.
port
Syntax port port-id vport name monitor-threshold [interval seconds] [repeat repeat]
Context monitor>qos
Description This command monitors VPORT statistics.
Parameters port port-id — Specifies the port ID.
Values slot/mda/port [.channel]
esat-id/slot/port
pxc-id.sub-port
vport name — Displays statistics for the named VPORT.
monitor-threshold — Displays the exceed-count for the port-scheduler for the named VPORT.
interval — seconds — Configures the interval for each display in seconds.
Default 11 seconds
Values 11 to 60
repeat repeat — Configures how many times the command is repeated.
Default 10
Values 1 to 999
scheduler-stats
Syntax scheduler-stats
Context monitor>qos
Description This command enables the context to configure monitor commands for scheduler statistics.
To Next Page
Loading...
