CLI Usage
Basic System Configuration Guide 115
A:ALA-12>monitor>router>bgp# neighbor 180.0.0.10 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for BGP Neighbor 180.0.0.10
===============================================================================
At time t = 0 sec
-------------------------------------------------------------------------------
Recd. Prefixes : 2 Sent Prefixes : 0
Recd. Paths : 0 Suppressed Paths : 0
Num of Flaps : 0
i/p Messages : 916 o/p Messages : 916
i/p Octets : 17510 o/p Octets : 17386
i/p Updates : 2 o/p Updates : 0
-------------------------------------------------------------------------------
At time t = 3 sec
-------------------------------------------------------------------------------
Recd. Prefixes : 0 Sent Prefixes : 0
Recd. Paths : 0 Suppressed Paths : 0
Num of Flaps : 0
i/p Messages : 0 o/p Messages : 0
i/p Octets : 0 o/p Octets : 0
i/p Updates : 0 o/p Updates : 0
-------------------------------------------------------------------------------
At time t = 6 sec
-------------------------------------------------------------------------------
Recd. Prefixes : 0 Sent Prefixes : 0
Recd. Paths : 0 Suppressed Paths : 0
Num of Flaps : 0
i/p Messages : 0 o/p Messages : 0
i/p Octets : 0 o/p Octets : 0
i/p Updates : 0 o/p Updates : 0
-------------------------------------------------------------------------------
At time t = 9 sec
-------------------------------------------------------------------------------
Recd. Prefixes : 0 Sent Prefixes : 0
Recd. Paths : 0 Suppressed Paths : 0
Num of Flaps : 0
i/p Messages : 0 o/p Messages : 0
i/p Octets : 6 o/p Octets : 0
i/p Updates : 0 o/p Updates : 0
===============================================================================
A:ALA-12>monitor>router>bgp#
statistics
Syntax statistics [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>router>isis
Description This command displays statistical IS-IS traffic information at the configured interval until the
configured count is reached.
The first screen displays the current statistics related to the specified router statistics. The subsequent
statistical information listed for each interval is displayed as a delta to the previous display. When the
keyword rate is specified, the rate-per-second for each statistic is displayed instead of the delta.
To Next Page
Loading...
