CLI Usage
Basic System Configuration Guide 143
port-id — Specifies the physical port ID in the slot/mda/port, esat-id/slot/port or pxc-id.sub-port
format.
If the card in the slot has XMAs/MDAs installed, the port-id must be in the slot_number/
MDA_number/port_number format. For example 6/2/3 specifies port 3 on XMA/MDA 2 in
slot 6.
The port-id must reference a valid port type. When the port-id parameter represents SONET/
SDH and TDM channels, the port ID must include the channel ID. A period “.” separates the
physical port from the channel-id. The port must be configured as an access port. Channels
are supported on the 7750 SR.
If the SONET/SDH port is configured as clear-channel then only the port is specified.
bundle-id — Specifies the multilink bundle to be associated with this IP interface. The bundle
keyword must be entered at the beginning of the parameter. This parameter applies to the
7750 SR.
aps keyword
group-id 1 to 128
ccag-id ccag-id.path-id[cc-type]:cc-id
ccag keyword
id 1 to 8
path-id a | b
cc-type .sap-net | .net-sap
cc-id 1 to 4094
eth-tunnel eth-tunnel-id[:eth-tun-sap-id]
id 1 to 1024
eth-tun-sap-id 0 to 4094
lag-id lag-id
lag keyword
id 1 to 800
pw-id pw-id
pw keyword
id 1 to 10239
qtag1 * | 0 to 4094
qtag2 * | null | 0 to 4094
vpi 0 to 4095 (NNI)
0 to 255 (UNI)
vci 1 | 2 | 5 to 65535
dlci 16 to 1022
tunnel-id tunnel-id.private | public:tag
tunnel keyword
id 1 to 16
tag 0 to 4094
To Next Page
Loading...
