Basic CLI Command Reference
142 Basic System Configuration Guide
This command displays statistics for a specific SAP, identified by the port-id and encapsulation value,
at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the SAP. The subsequent statistical information
listed for each interval is displayed as a delta to the previous display. When the keyword rate is
specified, the rate-per-second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition.
Values
:null port-id | bundle-id | bpgrp-id | lag-id | aps-id
dot1q port-id | bundle-id | bpgrp-id | lag-id | aps-id | pw-id:[qtag1|cp-conn-
prof-id]
qinq port-id | bundle-id | bpgrp-id | lag-id | pw-id:[qtag1 cp-conn-prof-
id].[qtag2 | cp-conn-prof-id]
cp keyword
cp-conn-prof-id 1 to 8000
atm port-id | aps-id [:vpi/vci | vpi | vpi1.vpi2 | cp.conn-prof-id]
cp keyword
cp-conn-prof-id 1 to 8000
frame port-id | aps-id:dlci
cisco-hdlc slot/mda/port.channel
cem slot/mda/port.channel
ima-grp bundle-id [:vpi/vci | vpi | vpi1.vpi2 | cp.conn-prof-id]
cp keyword
cp-conn-prof-id 1 to 8000
port-id slot/mda/port[.channel]
esat-id/slot/port
pxc-id.sub-port
bundle-id bundle-type-slot/mda.-bundle-nu
bundle keyword
type ima | fr | ppp
bundle-num 1 to 336
bpgrp-id bpgrp-type-bpgrp-num
bgrp keyword
type ima | ppp
bgrp-num 1 to 2000
aps-id aps-group-id[.channel]
To Next Page
Loading...
