BOF Configuration Command Reference
216 Basic System Configuration Guide
primary-image
Syntax primary-image file-url
no primary image
Context bof
Description This command specifies the primary directory location for runtime image file loading.
The system attempts to load all runtime image files configured in the primary-image first. If this fails,
the system attempts to load the runtime images from the location configured in the secondary-image.
If the secondary image load fails, the tertiary image specified in tertiary-image is used.
All runtime image files (*.tim files) must be located in the same directory.
The no form of the command removes the primary-image configuration.
Default none
Parameters file-url — The location-url can be either local (this CPM) or a remote FTP server.
Values
secondary-config
Syntax secondary-config file-url
no secondary-config
Context bof
Description This command specifies the name and location of the secondary configuration file.
The system attempts to use the configuration as specified in secondary-config if the primary config
cannot be located. If the secondary-config file cannot be located, the system attempts to obtain the
configuration from the location specified in the tertiary-config.
Note that if an error in the configuration file is encountered, the boot process aborts.
The no form of the command removes the secondary-config configuration.
Default none
Parameters file-url — The secondary configuration file location, expressed as a file URL.
Values
file-url [local-url | remote-url] (up to 180 characters)
local-url [cflash-id/][file-path]
remote-url [{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-id cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
To Next Page
Loading...
