Boot Options
Basic System Configuration Guide 217
secondary-image
Syntax secondary-image file-url
no secondary-image
Context bof
Description This command specifies the secondary directory location for runtime image file loading.
The system attempts to load all runtime image files configured in the primary-image first. If this fails,
the system attempts to load the runtime images from the location configured in the secondary-image.
If the secondary image load fails, the tertiary image specified in tertiary-image is used.
All runtime image files (*.tim files) must be located in the same directory.
The no form of the command removes the secondary-image configuration.
Default none
Parameters file-url — The file-url can be either local (this CPM) or a remote FTP server.
Values
tertiary-config
Syntax tertiary-config file-url
no tertiary-config
Context bof
Description This command specifies the name and location of the tertiary configuration file.
The system attempts to use the configuration specified in tertiary-config if both the primary and
secondary config files cannot be located. If this file cannot be located, the system boots with the factory
default configuration.
Note that if an error in the configuration file is encountered, the boot process aborts.
file-url [local-url | remote-url] (up to 180 characters)
local-url [cflash-id/][file-path]
remote-url [{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-id cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
file-url [local-url | remote-url] (up to 180 characters)
local-url [cflash-id/][file-path]
remote-url [{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-id cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
To Next Page
Loading...
