BOF Configuration Command Reference
218 Basic System Configuration Guide
The no form of the command removes the tertiary-config configuration.
Default none
Parameters file-url — The tertiary configuration file location, expressed as a file URL.
Values
tertiary-image
Syntax tertiary-image file-url
no tertiary-image
Context bof
Description This command specifies the tertiary directory location for runtime image file loading.
The system attempts to load all runtime image files configured in the primary-image first. If this fails,
the system attempts to load the runtime images from the location configured in the secondary-image.
If the secondary image load fails, the tertiary image specified in tertiary-image is used.
All runtime image files (*.tim files) must be located in the same directory.
The no form of the command removes the tertiary-image configuration.
Default none
Parameters file-url — The location-url can be either local (this CPM) or a remote FTP server.
Values
file-url [local-url | remote-url] (up to 180 characters)
local-url [cflash-id/][file-path]
remote-url [{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-id cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
file-url [local-url | remote-url] (up to 180 characters)
local-url [cflash-id/][file-path]
remote-url [{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-id cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
To Next Page
Loading...
