System Command Reference
396 Basic System Configuration Guide
offset
Syntax offset offset
Context config>system>time>dst-zone
Description This command specifies the number of minutes that will be added to the time when summer time takes
effect. The same number of minutes will be subtracted from the time when the summer time ends.
Parameters offset — The number of minutes added to the time at the beginning of summer time and subtracted
at the end of summer time, expressed as an integer.
Default 60
Values 0 to 60
start
Syntax start {start-week} {start-day} {start-month} [hours-minutes]
Context config>system>time>dst-zone
Description This command configures start of summer time settings.
Parameters start-week — Specifies the starting week of the month when the summer time will take effect.
Values first, second, third, fourth, last
Default first
start-day — Specifies the starting day of the week when the summer time will take effect.
Default sunday
Values sunday, monday, tuesday, wednesday, thursday, friday, saturday
start-month — The starting month of the year when the summer time will take effect.
Values january, february, march, april, may, june, july, august,
september, october, november, december
Default january
hours — Specifies the hour at which the summer time will take effect.
Default 0
minutes — Specifies the number of minutes, after the hours defined by the hours parameter, when
the summer time will take effect.
Default 0
To Next Page
Loading...
