System Management
Basic System Configuration Guide 395
Parameters std-zone-name — The standard time zone name. The standard name must be a system-defined
zone in Table 29. For zone names in the table that have an implicit summer time setting, for
example MDT for Mountain Daylight Saving Time, the remaining start-date, end-date and
offset parameters need to be provided unless it is necessary to override the system defaults
for the time zone.
Values std-zone-name ADT, AKDT, CDT, CEST, EDT, EEST, MDT,
PDT, WEST
non-std-zone-name — The non-standard time zone name. Create a user-defined name created
using the zone
Values 5 characters maximum
end
Syntax end {end-week} {end-day} {end-month} [hours-minutes]
Context config>system>time>dst-zone
Description This command configures start of summer time settings.
Parameters end-week — Specifies the starting week of the month when the summer time will end.
Values first, second, third, fourth, last
Default first
end-day — Specifies the starting day of the week when the summer time will end.
Values sunday, monday, tuesday, wednesday, thursday, friday, saturday
Default sunday
end-month — The starting month of the year when the summer time will take effect.
Values january, february, march, april, may, june, july, august,
september, october, november, december}
Default january
hours — Specifies the hour at which the summer time will end.
Values 0 to 24
Default 0
minutes — Specifies the number of minutes, after the hours defined by the hours parameter, when
the summer time will end.
Values 0 to 59
Default 0
To Next Page
Loading...
