System Command Reference
450 Basic System Configuration Guide
message-fast-tx
Syntax message-fast-tx time
no message-fast-tx
Context config>system>lldp
Description This command configures the duration of the fast transmission period.
Parameters time — Specifies the fast transmission period in seconds.
Values 1 to 3600
Default 1
message-fast-tx-init
Syntax message-fast-tx-init count
no message-fast-tx-init
Context config>system>lldp
Description This command configures the number of LLDPDUs to send during the fast transmission period.
Parameters count — Specifies the number of LLDPDUs to send during the fast transmission period.
Values 1 to 8
Default 4
notification-interval
Syntax notification-interval time
no notification-interval
Context config>system>lldp
Description This command configures the minimum time between change notifications.
Parameters time — Specifies the minimum time, in seconds, between change notifications.
Values 5 to 3600
Default 5
reinit-delay
Syntax reinit-delay time
no reinit-delay
To Next Page
Loading...
