System Management
Basic System Configuration Guide 451
Context config>system>lldp
Description This command configures the time before re-initializing LLDP on a port.
Parameters time — Specifies the time, in seconds, before re-initializing LLDP on a port.
Values 1 to 10
Default 2
tx-credit-max
Syntax tx-credit-max count
no tx-credit-max
Context config>system>lldp
Description This command configures the maximum consecutive LLDPDUs transmitted.
Parameters count — Specifies the maximum consecutive LLDPDUs transmitted.
Values 1 to 100
Default 5
tx-hold-multiplier
Syntax tx-hold-multiplier multiplier
no tx-hold-multiplier
Context config>system>lldp
Description This command configures the multiplier of the tx-interval.
Parameters multiplier — Specifies the multiplier of the tx-interval.
Values 2 to 10
Default 4
tx-interval
Syntax tx-interval interval
no tx-interval
Context config>system>lldp
Description This command configures the LLDP transmit interval time.
To Next Page
Loading...
