Show, Clear, Debug, and Tools Command Reference
496 Basic System Configuration Guide
Description : TiMOS CLI - cflash capacity alarm falling
event using percentages : value=0, <=50 :
alarm-index 4, event-index 6 alarm-variable
OID tmnxCpmFlashPercentageUsed.1.10.2
Event Id : 6 Time Sent : 07/23/2015 18:15:46
=================================================================
time
Syntax time
Context show>system
Description This command displays the system time and zone configuration parameters.
Output The following table describes system time output fields.
Sample Output
A:ALA-1# show system time
===============================================================================
Table 54: System Time Field Descriptions
Label Description
Date & Time The system date and time using the current time zone.
DST Active Yes — Daylight Savings Time is currently in effect.
No — Daylight Savings Time is not currently in effect.
Zone The zone names for the current zone, the non-DST zone, and the DST
zone if configured.
Current Time Zone Indicates the process currently controlling the system time. SNTP, NTP,
PTP or NONE.
Zone type Non-standard — The zone is user-defined.
Standard — The zone is system defined.
Offset from UTC The number of hours and minutes added to universal time for the zone,
including the DST offset for a DST zone.
Offset from Non-DST The number of hours (always 0) and minutes (0 to 60) added to the time
at the beginning of Daylight Saving Time and subtracted at the end
Daylight Saving Time.
Starts The date and time Daylight Saving Time begins.
Ends The date and time Daylight Saving Time ends.
To Next Page
Loading...
