Show, Clear, Debug, and Tools Command Reference
552 Basic System Configuration Guide
Parameters peer ip-address — Clears the specified address of the multi-chassis peer.
port port-id — Clears the specified port ID of the multi-chassis peer.
port lag-id — Clears the specified Link Aggregation Group (LAG) on this system.
all — Clears all ports and/or sync tags.
sync-tag sync-tag — Clears the synchronization tag used while synchronizing this port with the
multi-chassis peer.
application — Clears the specified application information that was synchronized with the multi-
chassis peer.
Values The following are values for the 7750 SR and 7950 XRS:
Values The following are values for the 7450 ESS:
screen
Syntax screen
Context clear
Description This command allows an operator to clear the Telnet or console screen.
system
Syntax system
all: All supported applications
dhcp-server: local dhcp server
igmp: internet group management protocol
igmp-snooping: igmp-snooping
mc-ring: multi-chassis ring
mld-snooping: multicast listener discovery-snooping
srrp: simple router redundancy protocol
sub-host-trk subscriber host tracking
sub-mgmt: subscriber management
all All supported applications
igmp-snooping igmp-snooping
mc-ring multi-chassis ring
mld-snooping multicast listener discovery-snooping
sub-host-trk subscriber host tracking
sub-mgmt subscriber management
To Next Page
Loading...
